蒸汽介質適配閥門?

Steam medium adaptation valve

良工有多款產品適用于蒸汽管路。像 YG13H/Y、YG43H/Y 高靈敏度蒸汽減壓閥，屬于先導活塞式。它通過調節彈簧壓力設定出口壓力，利用膜片傳感出口壓力變化，驅動活塞調節主閥節流面積來減壓穩壓。此閥改進了活塞面積、節流與密封結構、導閥結構及調節彈簧形式，提升了對出口壓力變化的傳感效能，降低壓力偏差，延長使用壽命，適用于進口壓力和流量變化大的蒸汽管路。?

Lianggong has multiple products suitable for steam pipelines. YG13H/Y and YG43H/Y high-sensitivity steam pressure reducing valves belong to the pilot piston type. It sets the outlet pressure by adjusting the spring pressure, uses a diaphragm to sense the change in outlet pressure, and drives the piston to adjust the throttling area of the main valve to reduce and stabilize pressure. This valve has improved the piston area, throttling and sealing structure, pilot valve structure, and regulating spring form, enhancing the sensing efficiency of outlet pressure changes, reducing pressure deviation, and extending service life. It is suitable for steam pipelines with large changes in inlet pressure and flow rate. ?

上海良工的高溫高壓膜合式疏水閥也是蒸汽系統常用產品。它排空氣能力強，能耐受過熱蒸汽和水錘，可在壓力范圍內進行固定過冷循環操作。閥內膜盒有多種形式，適用于大排量。感溫元件耐蝕，材質有碳鋼和不銹鋼，小型輕量，安裝靈活，廣泛用于供熱汽主管線等蒸汽設備系統。?

Shanghai Lianggong's high-temperature and high-pressure membrane type drain valve is also a commonly used product in steam systems. It has strong air exhaust capacity, can withstand superheated steam and water hammer, and can perform fixed subcooling cycle operation within the pressure range. There are various forms of valve inner film box, suitable for large displacement. The temperature sensing element is corrosion-resistant and made of carbon steel and stainless steel. It is small and lightweight, and can be installed flexibly. It is widely used in steam equipment systems such as heating steam main pipelines. ?

腐蝕性液體適配閥門?

Corrosive liquid compatible valve

針對腐蝕性液體，昆山良工的 J41F4 - 16、J41F46 - 16 型襯氟截止閥表現突出。適用溫度 -50~150℃，可用于王水、硫酸等多種強酸、強堿及腐蝕性氣體、液體介質管路。該系列以 PTFE（F4）為內襯，能抵御多種強腐蝕性介質，原理是用襯氟材料隔離腐蝕性介質與閥門基體，保障閥門在復雜腐蝕環境穩定運行。?

For corrosive liquids, Kunshan Lianggong's J41F4-16 and J41F46-16 fluorine lined globe valves perform outstandingly. Suitable for temperatures ranging from -50 to 150 ℃, it can be used in pipelines for various strong acids, alkalis, corrosive gases, and liquid media such as aqua regia and sulfuric acid. This series is lined with PTFE (F4) and can resist various highly corrosive media. The principle is to use fluorine lined materials to isolate the corrosive media from the valve substrate, ensuring stable operation of the valve in complex corrosive environments. ?

此外，良工的不銹鋼球閥也適用于水、溶劑、酸和天然氣等部分腐蝕性介質管路。不銹鋼材質耐蝕，球閥結構緊湊、流體阻力小、操作便捷，開閉只需旋轉 90°，便于遠程控制。?

In addition, Lianggong's stainless steel ball valves are also suitable for pipelines containing corrosive media such as water, solvents, acids, and natural gas. Stainless steel material is corrosion-resistant, and the ball valve has a compact structure, low fluid resistance, and easy operation. It only needs to be rotated 90 ° for opening and closing, making it convenient for remote control. ?

高粘度介質適配閥門?

Valve adapted for high viscosity media

一體式保溫球閥是良工適用于高粘度介質的代表。它保溫保冷性能佳，閥門通徑與管徑適配，能減少介質熱量損失，用于輸送常溫下易凝固的高粘度介質，如石油、化工等系統。其整體式結構讓閥門體積小、重量輕、無外漏、密封好，夾套采用焊接碳素鋼管，耐壓牢固。?

The integrated insulated ball valve is a representative of Lianggong's suitability for high viscosity media. It has excellent insulation and cooling performance, and the valve diameter is compatible with the pipe diameter, which can reduce the heat loss of the medium. It is used to transport high viscosity media that are prone to solidification at room temperature, such as petroleum, chemical and other systems. Its integral structure makes the valve small in size, light in weight, leak free, and well sealed. The jacket is made of welded carbon steel pipe, which is pressure resistant and firm. ?

江蘇良工牌電動 V 型調節球閥適用于高粘度、懸浮液、紙漿等含纖維介質場合。它與執行機構直連，結構緊湊、尺寸小、重量輕、阻力小且動作靈敏。V 型閥體設計，在小流量或高粘度時也能精確控制。閥座有軟、硬密封，關閉時 V 型缺口與閥座有楔形剪切作用，具有自潔功能，可防球芯卡死，適用于管線結垢或含纖維、顆粒固體的場合。

Jiangsu Lianggong brand electric V-shaped regulating ball valve is suitable for high viscosity, suspension, pulp and other fiber containing media applications. It is directly connected to the actuator, with a compact structure, small size, light weight, low resistance, and sensitive action. The V-shaped valve body design allows for precise control even at low flow rates or high viscosity. The valve seat has soft and hard seals, and when closed, the V-shaped notch has a wedge-shaped shear effect with the valve seat. It has self-cleaning function and can prevent the ball core from getting stuck. It is suitable for situations where pipelines are scaled or contain fiber or particle solids.

本文由良工閥門友情奉獻.更多有關的知識請點擊:http://www.xinfeng-zipper.com我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

This article is dedicated to friendship For more information, please click: We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message